BW-615 targeted HI room and well-designed, after dozens of acoustic design testing and dedicated HI room test, and finally introduced in the third generation HI room speaker in the 2012. Using the wrong title diffusion constant directivity horn design, the box body is provided with a 15 inch reflector type low frequency drive and a 1 inch high frequency compression type drive, these advanced components and internal passive crossover network phase (two optional frequency effect) to ensure, in the transition between high frequency and low frequency unit unit has no joint. BW-615xt is equipped with an intelligent protection circuit, when added to the compression on the drive signal for potential damage when the circuit can automatically and visibly signal attenuation, and high frequency driver free of accidental damage. Two treble effect can be selected in the wiring board, more designed for different HI room, to achieve the best coupling quality. BW-615xt with the 35mm speaker base or with optional vertical bar to be fixed on the BW series of bass speakers, so that small clubs in the hotel room gives a good vertical coverage. Can choose M10 fixed ring screw bolt mounting shoulder back, with the addition of a hanging point is also located in the BW-615xt box, the vertical inclination of it can provide FCL body, so as to cover the required field.

Concert          

Café          

Do HI room and K room          

Fixed installation          

Club performance, listening

The frequency response 50 Hz - 20 kHz + 3dB          

The driver 1X15 inch reflective 1X1 inch woofer reflective high frequency unit          

The speaker power 400 Watt (1600 Watt Peak Power)          

The sensitivity of 1m\1w 99dB          

The maximum sound pressure level 130dB          

Rated impedance of 8 ohm          

The frequency optional two treble way          

High angle cover 50 degrees to 100 degrees by 55 degree vertical can be horn rotation, fixed position 4          

The material 18MM high quality 11 layer plywood          

The appearance of color wear black, two-component appearance finishing, high scratch protection          

Net 1.2mm six angle, back acoustically transparent sponge          

The input interface 2 Neutrik 4 core seat          

The size (width X X) 466 mm x 443 mm x 690 mm          

The weight of 33Kg          

Install the system 12 M10 inner T- screw buckle           1 speakers at the bottom with the support base, can support mounting bracket           2 handles          

Controlleroptions XTA, DBX, SEAPRO can provide the required parameter settings           (40 weeks following the time needed to remove low-frequency components)          

Material selection by the European environmental standards ROHS